URETHANE TOOLING & ENGINEERING CORPORATION
Phone: 1(800) 435-3899 Fax: 1(800) 892-1133
Web Site: http://www.urethanetooling.com E-Mail: info@urethanetooling.com

Back to UTEC Home Page | Back to General/Standard Product Information

TOOL-A-THANE Urethane Wipe Down Die

Advantages of TOOL-A-THANE Urethane Wipe Down Die 

              Forms 90 degree bends with no sheet "flip up"
        Excellent accuracy         High Blank holding pressures
        Non-Scratching             Main die 12" sections only
        Minimal Marring            Both UT-5 & Tool Steel Wipers
        Simple set-up              Easy replacement of wipers & springs

Capacities: 

With:   Standard 1" x 1" x 12" UT-5 Wiper (supplied with die) - 16 ga.
        1/4" x 1" x 12" UT-5 Wiper - 20 ga.
        7/8" x 1" x 12" Tool-Steel Wiper - 1/8" mild steel

Availability:

Basic Die comes in one foot sections for the forming horn, which will be supplied in one piece - the length on the die ordered. Standard die comes with 1" x 1" x 12" UT-5 wiper blade. If other wiper assemblies are required, please specify when ordering.

Buy a die now and later add on to the die with additional purchase of 12" more sections.

TOOL-A-THANE Urethane Wipe Down Die 
       Description:
           TOOL-A-THANE Urethane Wipe Down Die Complete
           TOOL-A-THANE Urethane Wipe Down Die Top Complete
           TOOL-A-THANE Urethane Wipe Down Die Bottom Complete
           TOOL-A-THANE Urethane Forming Horn Complete

For prices Click here: TOOL-A-THANE urethane Wipe Down Die